Year 13 Geography · TeamGeo 2026
Notes, diagrams and videos for each part of the SECCE.
This section has the information you’ll need to answer the NCEA exam. If we learn about the main landforms and how they have been made by natural processes, we should be able to answer any of the three main exam questions. (Important: past exam questions, and how to answer them, are in the NCEA Questions tab.)
You don’t need to be able to do all the other diagrams I’ve done! I just did them to make it more interesting to study. Of course, if you wanted to, you could pop smaller versions of them within your writing.
Practice activities. Write a paragraph, get it marked, then improve it.
Revise the SECCE by playing.
The three types of exam question for AS91426, past papers with how to answer them, and essays to practise.
Question A
How have natural processes shaped your environment?
Draw a map of the SECCE showing several of the main landforms, then explain, in reasonable detail, how each of them was made by named processes. You could talk about erosion features first, and then some of the deposition features.
Start with: The SECCE
Question B
How have natural processes interacted to form ONE landform?
Choose ONE landform, the coastal cliffs at Scarborough Headland, and explain, in a lot of detail, what Scarborough Headland is like and the sequence of how different processes have combined to make the cliffs, how it happens repeatedly, and that the cliffs continue to retreat.
Start with: Scarborough Headland
Question C
What spatial (or temporal) variations exist in your setting?
Explain how things happen differently in different places in the SECCE. It is still based on the same material, but you need to compare and contrast. There are three main spatial variations.
Start with: Spatial Variation
Tap a year to open it. Work out which of the three questions it is asking before you read how to answer it.
How do interacting natural processes create spatial OR temporal variations in a New Zealand geographic environment?
In your response:
[Large one-page frame for diagram, and several pages of lines for writing]
This question is Question C: What spatial (or temporal) variations exist in your setting?
Ideally, you would draw a map of the whole SECCE, and draw wave lines on it to show where energy is concentrated and dispersed. I do this by doing my first line close to the beach/coast. I make sure in the bays that the wave lines are spaced apart, but when I get to the headland or peninsula areas, I go in nice and close and make the wave lines there very close together. As you do more wave lines further out at sea, they start smoothing out, and ideally, by the time they’re on the right-hand side of your diagram they are pretty much straight, showing the waves approaching from the east.
You should then add annotations or captions (a short sentence or two each; not just a label, and not a full paragraph, somewhere in between) to show the variations below.
Make sure there is a title, north point and scale on the map/diagram.
The three spatial variations you could talk about are:
You should introduce our case study of the SECCE and mention the processes, landforms and variations you’ll talk about (see the possible intro below). Remember, the teacher marking your answer will be from a different part of the country, and will be marking different types of landscapes, so we need to set the scene and explain our context.
You would then have a solid paragraph explaining each of the three points above (perhaps supported with a smaller annotated diagram).
Remember to include important geographic concepts. You can either reference them during your paragraphs where relevant, or have a dedicated paragraph at the end that draws attention to how the coastal processes and landforms demonstrate the concepts. Be explicit. Say “This shows the geographic concept of …” Likely concepts are interaction (waves bending around landforms: refraction), change, processes and systems.
Possible intro:
“The Southeast Christchurch Coastal Environment (SECCE) is located around 6 km southeast of Christchurch. The SECCE coastline extends along a 7 km arc from New Brighton Beach in the north to Godley Head in the southeast. A combination of tectonic, marine, fluvial and tidal processes occur in the SECCE, but some of these processes operate differently in parts of the environment. The main spatial variations relate to wave action, where wave erosion dominates along some parts of the coast, while wave deposition alters other sections. There are also variations in how wave erosion operates on different types of headland, and in the sediment supply at different beaches in the SECCE.”
How do interacting natural processes shape a New Zealand geographic environment?
In your response:
[Large one-page frame for diagram, and several pages of lines for writing]
This question is Question A: How have natural processes shaped your environment?
You should draw a map of the whole SECCE, using a key to show the different landforms (coastal cliffs, eroded headland, stump, pocket beach, spit etc). The pattern in your key needs to exactly match the pattern you’ve used on each landform (using just a solid colour with coloured pencil is easiest).
You should then add the feature and place names on your map by writing them close to their location on the map (Scarborough Headland, Black Rock Point, Sumner Beach, Taylors Mistake, Godley Head etc).
You should then add some short annotations or captions for each of the main landforms (a short sentence each; not just a label, and not a full paragraph, somewhere in between) to briefly describe the landform, e.g. at Taylors Mistake: “Isolated pocket beach cut off from sediment supply.”
Make sure there is a title, north point and scale on the map/diagram.
You should introduce our case study of the SECCE and mention the processes and landforms you’ll talk about (see the possible intro below). Remember, the teacher marking your answer will be from a different part of the country, and will be marking different types of landscapes, so we need to set the scene and explain our context.
You would then spend a paragraph on how each landform was formed, identifying specific processes responsible (and any interactions between processes along the way). You should include relevant facts and figures, and perhaps a smaller annotated diagram with each landform.
Think about how you link your paragraphs, so that it flows as an essay. You are essentially taking the marker on a tour of your case-study area, focusing on the different types of landforms and the processes that create them. Here are some examples of sentences that link things together (these are the first sentences of new paragraphs): “Further north, at the mouth of the Avon-Heathcote Estuary, is another deposition feature: an ebb tidal delta” or “Another landform that has been created through wave erosion is the stump at Black Rock Point.”
If you are going hard out for this paper, you might want to do as many landforms as possible, but as a very rough guide: three for Achieved, four or so for Merit, five or six for Excellence.
I’d structure your answer by talking about erosion features first and then deposition features. Here is the full list you’d be choosing from:
Erosion features
Remember to include important geographic concepts. You can either reference them during your paragraphs where relevant, or have a dedicated paragraph at the end that draws attention to how the coastal processes and landforms demonstrate the concepts. Be explicit. Say “This shows the geographic concept of …” Likely concepts are interaction (waves bending around landforms: refraction), change, processes and systems.
Possible intro:
“The Southeast Christchurch Coastal Environment (SECCE) is located around 6 km southeast of Christchurch. The SECCE coastline extends along a 7 km arc from New Brighton Beach in the north to Godley Head in the southeast. A combination of tectonic, marine, fluvial and tidal processes have interacted to create a range of coastal erosion features (coastal cliffs, eroded headlands, caves and a stump), as well as deposition features (beaches, spit, ebb tidal delta).”
Analyse how different processes operate and interact to create spatial variations in your chosen geographic environment.
Your analysis should include:
Use the space below to construct a map or diagram to support your written response. You may also include additional diagrams and maps in your response.
[Large one-page frame for diagram, and several pages of lines for writing]
This question is Question C: What spatial (or temporal) variations exist in your setting? Answer it the same way as the 2024 paper above: a map of the whole SECCE with wave lines bunched at the headlands and spread out in the bays, annotations for the three spatial variations, an introduction that sets the scene, a solid paragraph on each variation, and the geographic concepts named explicitly.
The three spatial variations are covered in full on the Spatial Variation page.
Analyse how one natural process interacts with at least one other natural process to shape one or more features of your chosen New Zealand geographic environment.
Use the space below to construct a map or diagram to support your written response.
Integrate comprehensive supporting case study evidence. You may integrate other diagrams and maps to support your written answer.
[Large one-page frame for diagram, and several pages of lines for writing]
This question is pretty much Question B: How have natural processes interacted to form ONE landform?
However, notice the subtle focus on processes in the question: “Analyse how one natural process interacts with at least one other natural process to shape one or more features of your chosen New Zealand geographic environment.”
Our most detailed landform is the coastal cliffs at Scarborough Headland, so our answer should be about volcanism and wave erosion interacting to produce the coastal cliffs (along with all the other processes along the way, like the wave erosion sub-processes of hydraulic action, attrition and abrasion).
This question can be about just the one landform, but it also opens the door to multiple landforms. Remember this particular question is centred on the processes involved. If you were doing volcanism and wave erosion, you could do the coastal cliffs at Scarborough AND the eroded headland at Black Rock Point. If you were doing wave refraction and wave action (which includes wave erosion, wave transportation and wave deposition), you could do almost all the landforms!
You could do the cross-section (side-on) diagram of cliff formation at Scarborough, or the oblique (angled) sketch of the headland, or perhaps both! You could divide the main diagram frame, or add a second diagram at the start of your writing pages. Don’t worry, markers love diagrams.
You should then add some short annotations or captions to the diagram (short sentences; not just a label, and not a full paragraph, somewhere in between) to briefly describe the features of the coastal cliffs at Scarborough Headland.
Make sure there is a title, north point and scale on the diagram(s).
You should introduce our case study of the SECCE and mention the processes and landform(s) you’ll talk about (see the possible intro below). Remember, the teacher marking your answer will be from a different part of the country, and will be marking different types of landscapes, so we need to set the scene and explain our context.
If focusing on the coastal cliffs at Scarborough Headland, you would write a sequence of paragraphs that show the steps: creating the cliffs in the first place, undercutting the cliff with erosion, then the cliff collapsing, and the process repeating, causing the cliff to keep retreating and exposing the trachyte dykes that remain.
Remember to include important geographic concepts. You can either reference them during your paragraphs where relevant, or have a dedicated paragraph at the end that draws attention to how the coastal processes and landforms demonstrate the concepts. Be explicit. Say “This shows the geographic concept of …” Likely concepts are interaction (waves bending around landforms: refraction), change, processes and systems.
Possible intro:
“The Southeast Christchurch Coastal Environment (SECCE) is located around 6 km southeast of Christchurch. The SECCE coastline extends along a 7 km arc from New Brighton Beach in the north to Godley Head in the southeast. One of the most significant landforms in the SECCE is the coastal cliffs at Scarborough Headland. These coastal cliffs have been formed by the interaction of volcanism and wave erosion, along with several other processes (wave refraction, weathering, haloclasty, tectonic uplift) and sub-processes (hydraulic action, attrition and abrasion).”
Draw an annotated map that illustrates the features and characteristics of your named New Zealand geographic environment.
Comprehensively analyse how interacting natural processes that operate together have shaped your named New Zealand geographic environment.
In your answer:
[Large one-page frame for diagram, and several pages of lines for writing]
Draw a diagram(s) and/or map(s) to explain how two named natural processes interact in your chosen New Zealand geographic environment.
Comprehensively analyse how interacting natural processes create spatial variations within your chosen New Zealand geographic environment.
[Large one-page frame for diagram, and several pages of lines for writing]
(a) Draw map(s) and/or diagram(s) that explain how ONE natural process operates in your chosen New Zealand geographic environment.
(b) Comprehensively analyse how the process you have drawn and explained in part (a) interacts with at least one other natural process, to shape a feature(s) in your chosen New Zealand geographic environment.
[Large one-page frame for diagram, and several pages of lines for writing]
Something you should do is look at the past exams, and practise working out which of the three main questions they are asking. You need to pay close attention, because the differences can be subtle.
I’ll let you know if any further material is added to the site.
Practice for the skills paper (AS91429), using real past papers.
How to get the most marks on the day. Tap a heading to open it.
More detail from NZQA: rules for students in exams.
You’ll have three booklets on your desk when you arrive in the exam:
Remember, the expectation is that you will complete ONE or TWO of the standards. If you’re only doing one, you can just put the other booklet on the ground.
In NCEA, you’ll usually receive a Not Achieved grade for an unfinished booklet. If you don’t write in a booklet at all, it will be recorded as Standard Not Attempted, which is fine and preferable to a Not Achieved.
So make sure you’re ready and able to fully complete the booklet. Some of you may be able to attempt all three standards, but please check the time!
First of all, relax! The exam is not a trap. They are not trying to catch you out. It is just an opportunity for you to show what you know.
Your answers in the booklet don’t need to be a work of art. If you need to scribble something out and rewrite it, so be it. Do what it takes to get your ideas and any additions across.
If you’re prepared for the exam, you’ll do well and be very satisfied at the end. Good luck, Team Geo!
In all of the Year 13 Geography exam booklets, you’ll have to write some long answers, otherwise known as extended paragraphs or essays.
In Geography we keep our long answers in an objective tone. This means we try not to bring emotions or first-person perspectives into it.
Writing in Geography is more like textbook-style writing, where you are explaining things clearly without trying to convince or entertain.
My advice
One of the biggest issues for some students is that they think they shouldn’t bother stating the obvious, or feel silly explaining things they think the marker already knows. This is incorrect. The whole point of the exam is for you to show that YOU know that stuff. The marker wants you to state the obvious 🙂
Ideally your answer will have several paragraphs. There should be a simple introduction and probably three or four main ideas related to the topic, and each of these ideas needs its own paragraph. The strongest answers will also have a paragraph linking to a specific geographic concept.
The best way to write your paragraphs is to make sure they have these three things:
“The most significant erosion features in the SECCE are the sea cliffs at Scarborough Headland.”
“The wave erosion sub-processes of hydraulic action, attrition and abrasion work together to erode a notch at the base of the cliff. Over time, this notch gets bigger and deeper under the cliff, until the cliff face becomes unstable and gravity brings the cliff down.”
“At Scarborough Headland, the cliffs have retreated around 80 metres inland compared with the erosion-resistant trachyte dykes, and a wave-cut platform extends around 25 metres at low tide.”
Firstly, make sure you’ve read the question carefully and understand it. A good introduction for a Geography exam answer should:
For example, if the question was “How do interacting natural processes shape a New Zealand geographic environment?”, you might have an introduction like this:
“The Southeast Christchurch Coastal Environment (SECCE) is located around 6 km southeast of Christchurch. The SECCE coastline extends along a 7 km arc from New Brighton Beach in the north to Godley Head in the southeast. A combination of tectonic, marine, fluvial and tidal processes have interacted to create a range of coastal erosion features (coastal cliffs, eroded headlands, caves and a stump), as well as deposition features (beaches, spit, ebb tidal delta).”
Geography is a very conceptual and integrated subject. It is all about connections. So the marker will want to see that you understand how your topic connects with big ideas and geographic concepts. There are two great ways to do this:
They usually give you a list of concepts and their definitions in the actual paper, just like the ones below. The best approach is to choose one part of the definition, state it clearly in your paragraph, and then say how this happens in the SECCE.
Example 1
“The geographic concept of interaction involves elements of an environment affecting each other and being linked together. This can be seen in the SECCE, where waves refract around Scarborough Headland and Black Rock Point, concentrating their energy on the headlands and creating erosion features, while diffraction spreads the wave energy out in bays such as Taylors Mistake, where deposition features form.”
Example 2
“The geographic concept of change can be spatial and/or temporal, and occurs at varying rates, at different times and in different places. This can be seen at Black Rock Point, where headland retreat over the last 6,000 years has turned a series of caves into an arch around 3,500 years ago, a stack after the arch collapsed around 1,000 years ago, and finally the stump that lies 20 metres off the point today.”